Poly(3-hexylthiophene-2,5-diyl) based diodes for ionizing radiation dosimetry applications

Accurate measurements of radiation dose are essential prerequisites for the safe and effective use of ionizing radiation in diagnostic and therapeutic medical applications. Recently, dosimeters based on organic polymers have been developed for this purpose. In this work, Poly(3-hexylthiophene-2,5-diyl) (P3HT) based organic diodes were evaluated as potential radiation dosimeters by quantifying the radiation-induced photocurrent under various measurement conditions. Control devices were fabricated in which the P3HT was replaced by polystyrene (PS) for the purpose of quantifying the non-photocurrent contribution to the measured signal. Net photocurrent was determined by subtracting the signal from the PS devices from the signal in the P3HT devices under identical measurement conditions. The responses of these devices were tested in various beam qualities: 100 kVp, 180 kVp, 300 kVp and 6 MV, 18 MV photons. The influences of electric field, film thickness and dose rate on dosimeter sensitivity were investigated. The diodes produced a linear increase in current with increasing dose rate. They demonstrated an increase in sensitivity with increased instantaneous dose rate and an increase in sensitivity at the lowest average dose rates studied here. The sensitivities for different energies were 22.9 nC/Gy, 21.8 nC/Gy and 21.4 nC/Gy for 100 kVp, 180 kVp and 300 kVp, respectively; and 14.5 nC/Gy, 14.7 nC/Gy for 6 MV and 18 MV, respectively for device with P3HT thickness 29 μm.     

Split Enzyme-Based Biosensors for Structural Characterization of Soluble and Insoluble β-Glucans

β-Glucan is widely distributed in various plants and microorganisms and is composed of β-1,3-linked d-glucose units. It may have a branched short or long side chain of glucose units with β-1,6- or β-1,4-linkage. Numerous studies have investigated different β-glucans and revealed their bioactivities. To understand the structure-function relationship of β-glucan, we constructed a split-luciferase complementation assay for the structural analysis of long-chain β-1,6-branched β-1,3-glucan. The N- and C-terminal fragments of luciferase from deep-sea shrimp were fused to insect-derived β-1,3-glucan recognition protein and fungal endo-β-1,6-glucanase (Neg1)-derived β-1,6-glucan recognition protein, respectively. In this approach, two β-glucan recognition proteins bound to β-glucan molecules come into close proximity, resulting in the assembly of the full-length reporter enzyme and induction of transient luciferase activity, indicative of the structure of β-glucan. To test the applicability of this assay, β-glucan and two β-glucan recognition proteins were mixed, resulting in an increase in the luminescence intensity in a β-1,3-glucan with a long polymer of β-1,6-glucan in a dose-dependent manner. This simple test also allows the monitoring of real-time changes in the side chain structure and serves as a convenient method to distinguish between β-1,3-glucan and long-chain β-1,6-branched β-1,3-glucan in various soluble and insoluble β-glucans.     

Comparing open data benchmarks: Which metrics and methodologies determine countries’ positions in the ranking lists?

An understanding of the similar and divergent metrics and methodologies underlying open government data benchmarks can reduce the risks of the potential misinterpretation and misuse of benchmarking outcomes by policymakers, politicians, and researchers. Hence, this study aims to compare the metrics and methodologies used to measure, benchmark, and rank governments' progress in open government data initiatives. Using a critical meta-analysis approach, we compare nine benchmarks with reference to meta-data, meta-methods, and meta-theories. This study finds that both existing open government data benchmarks and academic open data progress models use a great variety of metrics and methodologies, although open data impact is not usually measured. While several benchmarks’ methods have changed over time, and variables measured have been adjusted, we did not identify a similar pattern for academic open data progress models. This study contributes to open data research in three ways: 1) it reveals the strengths and weaknesses of existing open government data benchmarks and academic open data progress models; 2) it reveals that the selected open data benchmarks employ relatively similar measures as the theoretical open data progress models; and 3) it provides an updated overview of the different approaches used to measure open government data initiatives’ progress. Finally, this study offers two practical contributions: 1) it provides the basis for combining the strengths of benchmarks to create more comprehensive approaches for measuring governments’ progress in open data initiatives; and 2) it explains why particular countries are ranked in a certain way. This information is essential for governments and researchers to identify and propose effective measures to improve their open data initiatives.     

基于云网PoP的弹性边缘网络设计思路探讨

移动边缘云是公司“云+5G”双引擎战略的最佳契合点,边缘网络是发挥移动云“大云”产品和5G网络融合优势,实现云网统筹、构建运营商“连接+计算”核心能力的关键。运营商传统接入网存在云网割裂、分段入云和组网复杂等突出问题,难以适应边缘业务敏捷交付要求。本文通过深入分析边缘云业务特征和技术架构,对标业界主流云商建设实践,研究基于云网PoP网的边缘网络建设思路,创新性提出云网一体化规划设计和建设交付流程变革,基于云网POP统一网络和业务锚点,构建Overlay和Underlay融合双层加速网络架构,探索Spine-leaf化的新型城域接入网实现L3下沉和弹性扩容等方法,实现“云+网+应用”一体化敏捷交付的边缘网络能力。     

Functional Coupling of Slack Channels and P2X3 Receptors Contributes to Neuropathic Pain Processing

The sodium-activated potassium channel Slack (K_Na1.1, Slo2.2, or Kcnt1) is highly expressed in populations of sensory neurons, where it mediates the sodium-activated potassium current (I_KNa) and modulates neuronal activity. Previous studies suggest that Slack is involved in the processing of neuropathic pain. However, mechanisms underlying the regulation of Slack activity in this context are poorly understood. Using whole-cell patch-clamp recordings we found that Slack-mediated I_KNa in sensory neurons of mice is reduced after peripheral nerve injury, thereby contributing to neuropathic pain hypersensitivity. Interestingly, Slack is closely associated with ATP-sensitive P2X3 receptors in a population of sensory neurons. In vitro experiments revealed that Slack-mediated I_KNa may be bidirectionally modulated in response to P2X3 activation. Moreover, mice lacking Slack show altered nocifensive responses to P2X3 stimulation. Our study identifies P2X3/Slack signaling as a mechanism contributing to hypersensitivity after peripheral nerve injury and proposes a potential novel strategy for treatment of neuropathic pain.     

AP2M1 Supports TGF-β Signals to Promote Collagen Expression by Inhibiting Caveolin Expression

The extracellular matrix (ECM) is important for normal development and disease states, including inflammation and fibrosis. To understand the complex regulation of ECM, we performed a suppressor screening using Caenorhabditis elegans expressing the mutant ROL-6 collagen protein. One cuticle mutant has a mutation in dpy-23 that encodes the μ2 adaptin (AP2M1) of clathrin-associated protein complex II (AP-2). The subsequent suppressor screening for dpy-23 revealed the lon-2 mutation. LON-2 functions to regulate body size through negative regulation of the tumor growth factor-beta (TGF-β) signaling pathway responsible for ECM production. RNA-seq analysis showed a dominant change in the expression of collagen genes and cuticle components. We noted an increase in the cav-1 gene encoding caveolin-1, which functions in clathrin-independent endocytosis. By knockdown of cav-1, the reduced TGF-β signal was significantly restored in the dpy-23 mutant. In conclusion, the dpy-23 mutation upregulated cav-1 expression in the hypodermis, and increased CAV-1 resulted in a decrease of TβRI. Finally, the reduction of collagen expression including rol-6 by the reduced TGF-β signal influenced the cuticle formation of the dpy-23 mutant. These findings could help us to understand the complex process of ECM regulation in organism development and disease conditions.     

Exploring Molecular Contacts of MUC1 at CIN85 Binding Interface to Address Future Drug Design Efforts

The modulation of protein-protein interactions (PPIs) by small molecules represents a valuable strategy for pharmacological intervention in several human diseases. In this context, computer-aided drug discovery techniques offer useful resources to predict the network of interactions governing the recognition process between protein partners, thus furnishing relevant information for the design of novel PPI modulators. In this work, we focused our attention on the MUC1-CIN85 complex as a crucial PPI controlling cancer progression and metastasis. MUC1 is a transmembrane glycoprotein whose extracellular domain contains a variable number of tandem repeats (VNTRs) regions that are highly glycosylated in normal cells and under-glycosylated in cancer. The hypo-glycosylation fosters the exposure of the backbone to new interactions with other proteins, such as CIN85, that alter the intracellular signalling in tumour cells. Herein, different computational approaches were combined to investigate the molecular recognition pattern of MUC1-CIN85 PPI thus unveiling new structural information useful for the design of MUC1-CIN85 PPI inhibitors as potential anti-metastatic agents.     

Single Cell Bioprinting with Ultrashort Laser Pulses

Tissue engineering requires the precise positioning of mammalian cells and biomaterials on substrate surfaces or in preprocessed scaffolds. Although the development of 2D and 3D bioprinting technologies has made substantial progress in recent years, precise, cell-friendly, easy to use, and fast technologies for selecting and positioning mammalian cells with single cell precision are still in need. A new laser-based bioprinting approach is therefore presented, which allows the selection of individual cells from complex cell mixtures based on morphology or fluorescence and their transfer onto a 2D target substrate or a preprocessed 3D scaffold with single cell precision and high cell viability (93–99% cell survival, depending on cell type and substrate). In addition to precise cell positioning, this approach can also be used for the generation of 3D structures by transferring and depositing multiple hydrogel droplets. By further automating and combining this approach with other 3D printing technologies, such as two-photon stereolithography, it has a high potential of becoming a fast and versatile technology for the 2D and 3D bioprinting of mammalian cells with single cell resolution.